Perform Deep Stone Cleaner is a highly concentrated cleaner for cleaning all types of interior and exterior natural stone. It is formulated to effectively remove light construction debris, dirt, light wax coatings and layer build-up of maintenance chemicals as well as to clean joints.
Perform Deep Stone Cleaner is recommended for marble, granite, concrete, travertine, terrazzo, limestone, slate and ceramic tiles where it cleans clogged pores and has a dirt-absorbing effect. Contains no solvents and is alkaline = no acid that can etch the stone surface.
Note: Always perform a bonnet test area to control efficiency and results.
Instructions for use / Dosage
Mix 1-2 liters of Perform deep Stone Cleaner with 10 liters of water depending on the degree of dirt. Scrub with a brush and/or coarse pad.
Leave on for 10 minutes and scrub again. Rinse twice with clean water. Repeat if necessary. Do not allow the product to dry on the surface - if this happens, re-wet the surface with water before starting to work.
Output: depending on the dosage, we estimate 20 to 40 m² / liter.
For professional use only. Safety data sheets are available for professional users.
pH about 13.0 in concentrate. Store frost-free.
Made in Sweden.
Part of the Perform Floor-Recond System
