Acid powder is used for cleaning extremely dirty clinker and granite ceramics as well as for removing joint residues.
Description
Acid powder is used for cleaning extremely dirty clinker and granite ceramics for removing joint residues.
manual:
Depending on the degree of dirt, 250-750 ml of Acid powder is mixed with 10 liters of warm water. Pre-wash the floor with, for example, a mop with plenty of water. Lay out the acid mixture over the floor and leave to work for about 2-3 minutes. Process the surface with a scrubber, brush (126-ST12B in our range) or similar. Wet vacuum the surface thoroughly and wash off the floor with, for example, the Hulk Por-Rent which is a weak alkaline detergent, this neutralizes any acid residues.
Note: Do not leave the acid mixture too long on the surface, then it can etch and carpet down the stone. If this happens, the stone must be sanded by the appropriate method. This is best done by your local stone specialist.
Always perform a bonnet test area to test the result before an entire surface is processed.
Acid powder is part of our own production line Perform Floor-Recond System, which is manufactured in Sweden.
Packaging
5 kg bucket
Ordered individually.
Minimum order is 1 pc.
EAN code Bucket 5 kg:
| 7330254001373 |
For the download of safety data sheets and product data sheets click here.
