Perform Hulk OP
Much more than an all-purpose cleaner, Perform Hulken OP is a product that combines high cleaning power but is gentle on the surface.
Used for all types of cleaning, from daily cleaning to deep cleaning. Perform Hulken OP effectively dissolves water-soluble dirt and stains from mineral and synthetic oil, soot and grease. The product is pH-buffered, which means that it maintains its pH value even though dirty wash water should lower the pH value. This allows Perform Hulken OP to work longer and better, as the right pH is an important factor in the washing process itself.
For which surfaces? Suitable for all water-resistant floors and surfaces in all businesses. Also picks up dirt from the pores of the surface. If foaming problems occur when using a scrubbing machine, use Perform Anti-Skum in the dirty water tank, follow the dosage on the label. When spot cleaning, always rinse the surface with water.
New stone, concrete and linoleum floors: Construction cleaning dosage for deep cleaning - let the floor dry completely. Impregnate / protect with Perform Stone Gloss or with Perform Stone Soap Special - Original according to the dosage instructions. Spread with mop yarn or similar and polish if necessary.
Older stone, concrete and linoleum floors: machine scrubbing with Perform Hulk Por-clean and suitable scouring pad (e.g. blue or red). Impregnate/Protect with Perform Stone Gloss or with Perform Stentvål Special – the original according to Posology. Wipe out with Moppgarn or similar and efterpolera if necessary.
pH about 9,5 in concentrate. Store in frost-free conditions.
Recommended dosage:
Major cleaning: 0.5 dl to 10 liters of water
Daily cleaning: 0.25 - 0.5 dl to 10 liters of water
Mechanical cleaning: 0.25 - 0.5 dl to 10 liters of water
Mopping: 0.25 - 0.5 dl to 10 liters of water
Spot cleaning: 5 - 10 dl to 10 liters of water
For professional use only.
Made in Sweden.
Part of the Perform Floor-Recond System
