Clinkerrent is most often used in installation cleaning of granite ceramics, tiles and tile surfaces, but also in heavily soiled surfaces. Perform Clinkerrent removes joint mill residues or cement film that remain on the surfaces after installation. Unglazed plates should always be cleaned with Perform Clinkerrent after installation. Remember to always water-saturate the joints before use. Perform Klinkerrent is part of the Perform Floor-Recond System.
Use:
Never use in machines but are applied directly to the surface with e.g. mop. Let Perform Klinkerrent work for a few minutes, then scrub with scouring blocks or joint and edge brush or
doodlebug brush. Rinse thoroughly with water and repeat the cleaning if necessary. Please note that some so-called artificial glaze tiles cannot be cleaned with Perform Klinkerrent or other acidic detergents. Perform Clinkerrent dissolves grease, lime and slightly superficial rust stains.
Tips: It is advantageous to impregnate cleaned granite ceramics and klinkerytorna and joints with Perform 17.40. Daily cleaning after installation cleaning can be usefully performed with Perform Hulk Por-pure on glazed and impregnated surfaces and on unglazed surfaces used Perform Stentvål Special – the original.
Clinkerrent is part of our own production line Perform Floor-Recond System, which is manufactured in Sweden.
pH in concentrate approx. 1.
Dosage:
3 liters to 10 liters of lukewarm water.
Packaging
3 x 5 litres per carton
48 x 3 x 5 litres per pallet (720 litres)
Only unbroken cartons can be ordered
Minimum order is 1 carton of 3 x 5 liters
EAN code Dunk 5 liters:
| 7330254001625 |
EAN code Carton of 3 x 5 liters:
| 7330254001335 |
For the download of safety data sheets and product data sheets click here.