Granite spray White used together with Granite powder is used to restore worn bright granite floors and granite surfaces. This gives high gloss and a durable surface.
Important: The floor must be cleaned and dry. If the surface is very porous, you can use granite spray white only first before doing the treatment below. That way you work up a better top gloss. Work out the products on smaller surfaces, about 5-10 m² at a time and complete the entire operation as below.
Manual:
Pour out about 30 gr. Granite powder. Wet / mix with approx. 30 gr. Granite spray and process into the floor/surface with a low-speed crystallization machine or heavy low-speed scrubber (approx. 150-175 rpm)) and Perform Inox stainless steel wool round until all powder has disappeared. This takes about 2-4 min/m².
NB! No water may be used. Work with dry roundabouts. If insufficient lustre is achieved, repeat the procedure above. If black or white stripes (schattering (color shifts)) Granite spray White is used together with Granite powder is used to restore worn granite floors and granite surfaces. This gives high gloss and a durable surface arisen, set a
pig brush wheel under the machine and work together with Granitspray White and all schatterings disappear.
Consumption:
– Maintenance of shine on not too worn-down floors about 30 gr/m²
– In the case of matte granite about 60 gr/m²
– For very worn granite floors about 90 gr/m²
Note:
Always perform a test surface to check efficiency and results.
Granit Spray White is included in the Perform Floor-Recond System.
Packaging
3 x 5 litres per carton
48 x 3 x 5 litres per pallet (720 litres)
Ordered individually.
Minimum order is 1 pc
EAN code Dunk 5 liters:
| 7330254002585 |
For the download of safety data sheets and product data sheets click here.