Granite Powder is used together with Granit Spray White or Black to restore worn granite floors and granite surfaces. This gives high gloss and a durable surface.
Important: The floor must be well cleaned and dry. If the surface is very porous, granite spray can only be used first before making the treatment below. In this way, you work up a better top gloss. Work out the products on smaller surfaces at a time about 5-10 m2
Instructions for use: Pour out about 30 grams of Granite Powder. Wet / mix with about 30 grams of Granite Spray and process into the floor/surface with a low-speed crystallization machine or heavy low-speed scrubber (approx. 150-175 rpm) and Perform Inox stainless steel wool round until all powder has disappeared. This takes about 2-4 minutes / m2.
Note: This is not a good time No water may be used. Work with dry roundabouts. If insufficient lustre is achieved, repeat the procedure above. If black or white stripes (schattering) have arisen, put a pig brush pad under the machine and work together with Granit Spray and all schatterings will disappear.
Consumption:
– Maintenance of gloss on not too worn-down floor about 30 gr/m 2– In the case of matte granite about 60 gr/m 2– For very worn granite floors about 90 gr/m2
Note:
Always perform a test surface to check efficiency and results.
Granite powder is included in the Perform Floor-Recond System.
Packaging
25 kg
Ordered individually.
Minimum order is 1 piece.
EAN code bucket 25 kg:
| 7330254002578 |
For the download of safety data sheets and product data sheets click here.